Microsoft Introduces Digital Badges for Certifications and Exams

Pass Microsoft, CompTIA, HP, IBM, Oracle exams with Pass4itsure

[New Updated] 100% Pass Cisco TSHOOT 300-135 Dumps Exam Video Answers With A High Score

What is the best Cisco 300-135 dumps for Troubleshooting and Maintaining Cisco IP Networks? “Troubleshooting and Maintaining Cisco IP Networks” is the name of Cisco 300-135 exam dumps which covers all the knowledge points of the real Cisco exam. 100% pass Cisco TSHOOT 300-135 dumps exam video answers with a high score. Pass4itsure Cisco 300-135 dumps exam questions answers are updated (118 Q&As) are verified by experts.

The associated certifications of 300-135 dumps is CCNP Routing and Switching. Pass4itsure has started for many years in providing the IT certification Cisco dumps (Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)) exam preparation materials.

Exam Code: 300-135
Exam Name: Troubleshooting and Maintaining Cisco IP Networks
Updated: Sep 17, 2017
Q&As: 118

[New Updated Cisco 300-135 Dumps From Google Drive]:

[New Updated Microsoft 70-534 Dumps From Google Drive]:

This complete study package includes:

  • A test-preparation routine proven to help you pass the exam
  • Do I Know This Already? quizzes, which allow you to decide how much time you need to spend on each section
  • Chapter-ending exercises, which help you drill on key concepts you must know thoroughly
  • The powerful Cisco 300-135 dumps practice test software, complete with hundreds of exam-realistic questions, customization options, and detailed performance reports

300-135 dumps

Pass4itsure Latest and Most Accurate Cisco 300-135 Dumps Exam Q&As 

Given: You are the network administrator for ABC Company. Your manager has recently attended a
wireless security seminar. The seminar speaker taught that a wireless network could be hidden from
potential intruders if you disabled the broadcasting of the SSID in Beacons and configured the access
points not to respond to Probe Request frames that have a null SSID field.
Your manager suggests implementing these security practices. What response should you give to this
suggestion? (Choose two)
A. Any 802.11 protocol analyzer can see the SSID in clear text in frames other than Beacons and Probe
Response frames. This negates any security benefit of trying to hide the SSID in Beacons and Probe
Response frames.
B. This security practice prevents manufacturers’ client utilities from detecting the SSID. As a result, the
SSID cannot be obtained by attackers, except through social engineering, guessing, or use of a WIPS.
C. Although it does not benefit the security posture, hiding the SSID in Beacons and Probe Response
frames can be helpful for preventing some users (such as guests) from attempting to connect to the
corporate network.
D. Any tenants in the same building using advanced penetration testing tools will be able to obtain the
SSID by exploiting WPA EAPOL-Key exchanges. This poses an additional risk of exposing the WPA
E. To improve security by hiding the SSID, the AP and client stations must both be configured to remove
the SSID from association request and response frames. Most WLAN products support this.
300-135 exam Correct Answer: AC
What component of the 802.11 standard allows stations to reserve access to the RF medium for a
specified period of time?
A. Long slot times
B. DTIM Interval
C. Listen Interval
D. Probe Request frames
E. RTS or CTS frames
Correct Answer: E
Network users and IT personnel at a large machinery manufacturer have been discussing the potential
uses and benefits of implementing an indoor WLAN. The network administrator and network manager
have requested a meeting of senior management personnel to discuss a WLAN implementation before
taking any site survey or implementation steps. The first order of discussion in the meeting is corporate
policy concerning implementation and use of WLAN technology.
What specific topics are appropriate in this policy meeting? (Choose two)

A. Vendor hardware recommendations
B. Business justification
C. User productivity impact
D. Antenna types
E. Obtaining permits and zoning requirements
300-135 dumps Correct Answer: BC
In a long-distance RF link, what statement about Fade Margin is true?
A. Fade Margin is an additional pad of signal strength designed into the RF system to compensate for
unpredictable signal fading.
B. The Fade Margin of a long-distance radio link should be equivalent to the receiver’s antenna gain.
C. A Fade Margin is unnecessary on a long-distance RF link if more than 80% of the first Fresnel zone is
clear of obstructions.
D. The Fade Margin is a measurement of signal loss through free space, and is a function of frequency
and distance.
Correct Answer: A
What statement best describes the manual RF site survey report?
A. It is a series of notes taken during the interview with the network manager and given to the site survey
project manager.
B. It is a one-page network inspection summary used to create a certificate of network compliance.
C. It contains the results from the RF coverage, capacity, and interference analysis.
D. It is an internal document used by the site surveying firm for network deployment, and is not usually
shown to the client.
E. It states the customer requirements, business justification, and a detailed budget for the WLAN.
300-135 pdf Correct Answer: C
Why is it recommended for a wireless network administrator to disable 1 Mbps and 2 Mbps data rates on
the WLAN infrastructure? (Choose two)
A. To improve capacity in the BSS
B. To reduce the size of the AP’s effective service area
C. To prevent 802.11b devices from associating
D. To maximize the range of the highest data rates
E. To prevent VoWiFi multicast frames
F. To enable support for long preambles
Correct Answer: AB
When replacing the antenna of a WLAN device with a similar antenna type that has a higher passive gain,
what antenna characteristic will decrease?
A. Beamwidth
B. Range
C. Active gain
D. Receive sensitivity
E. Fresnel Zone size

300-135 vce Correct Answer: A
What word describes the bending of an RF signal as it passes from one medium to another medium of a
different density?
A. Diffraction
B. Reflection
C. Refraction
D. Diffusion
E. Scattering
Correct Answer: C
ABC Company performs top-secret government contract work and has recently purchased an 802.11
Wireless Intrusion Prevention System (WIPS) to enforce their “NO WIRELESS” network security policy.
What attack type cannot be recognized by the WIPS?
A. Deauthentication
B. MAC Spoofing
C. Protocol Jamming
D. Eavesdropping
E. RF Jamming
300-135 exam Correct Answer: D
What answers correctly complete the following sentence? ____________ and ____________ carrier
sense functions are used to determine whether the wireless medium is idle or busy. (Choose 2)
A. Passive
B. Pseudo-random
C. Virtual
D. Active
E. Physical
F. Interframe
G. Vector
Correct Answer: CE
What WLAN system feature is required to produce a scenario with the following configuration on a single
access point? (Choose 2)
1. SSID = Guest / BSSID = AA:AA:AA:AA:AA:AA /
VLAN = 22 / Subnet = / RF Channel = 6
2. SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /
VLAN = 33 / Subnet = / RF Channel = 6 / User Type A
3. SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /
VLAN = 44 / Subnet = / RF Channel = 6 / User Type B
A. Multiple WLAN Profiles
B. Call Admission Control

C. Virtual Cell with SCA
D. Access Categories
E. User-based authentication
F. Dual-radio AP hardware
G. Integrated DHCP server
300-135 dumps Correct Answer: AE
Given: You are an independent contractor, hired to perform an indoor site survey and network design for
ABC Hotel. The network will support both hotel staff and guest users. You are interviewing the network
manager to determine business, performance, and security requirements for the future 802.11 WLAN.
What questions should you ask the IT manager? (Choose two)
A. What data cabling is currently installed in the rooms and throughout the hotel?
B. How much RF loss do you expect between hotel rooms?
C. Where are the RF dead zones located within the facility?
D. What types of applications will be used by the hotel staff?
E. Are there any radar systems in use at the hotel that would conflict with the WLAN?
Correct Answer: AD
During the discovery and connectivity process, client and AP stations exchange information about their
supported data rates. After the association, how do client and AP stations select the supported data rate
that will be used to send an 802.11 data frame?
A. During the association, the client and AP agree to use the same transmit rate, but either station can
request a change at any time after the association.
B. The client and AP each choose the optimal data rate to use independently of one another, based on
their own experience of the RF link.
C. The client and AP may use different transmit rates, but the AP determines the data rate that will be
used by each client station in the BSS.
D. The client and AP may use different transmit rates, but the client determines the data rate that it will
use and the data rate that the AP will use when communicating to the client.
E. The client and AP may use a different transmit rates, but the transmit rate is determined by the peer
station, based on the peer’s experience of the RF link.
300-135 pdf Correct Answer: B

Pass4itsure win new and old customer’s praise based on the Cisco 300-135 dumps principle “Credit Standing First and Customers First”. We’ll be here dumps when you need us at anytime.

Read More Youtube:

Microsoft Introduces Digital Badges for Certifications and Exams © 2017 Frontier Theme