Microsoft Introduces Digital Badges for Certifications and Exams

Pass Microsoft, CompTIA, HP, IBM, Oracle exams with Pass4itsure

Your Reliable Partner for 300-101 Dumps | Cisco Certifications

We are committed on providing you with the latest and most accurate Cisco 300-101 dumps exam preparation products.If you want to pass Isaca CISA exam successfully, do not miss to read latest Cisco 300-101 on http://www.dumpsure.com/300-101.html.  Cisco 300-101 vce route training program is available for the candidates to prepare the test. Share some 300-101 route questions and answers below.

300-101 dumps

Which three conditions can cause BGP neighbor establishment to fail? (Select three)
A. There is an access list blocking all TCP traffic between the two BGP neighbors.
B. The EBGP neighbor is not directly connected, and the ebgp-multi-hop option is set to the default valu
C. The IBGP neighbor is not directly connected.
D. BGP synchronization is enabled in a Transit AS with fully-meshed IBGP neighbors.
E. The BGP update interval is different between the two BGP neighbors.
F. The BGP neighbor is referencing an incorrect AS number in its neighbor statement.
Answer: A,B,F

cisco 300-101 route training program, 300-101 dumps, 300-101 route test

Which three of the statements below correctly describe the characteristics of Autonomous Systems in routed networks? (Select three)
A. Within an AS, all routers must run either BGP or IBGP.
B. An AS uses exterior gateway protocols (EGPs) to exchange information with other autonomous systems.
C. An AS is a group of routers under the same technical administration.
D. Within an AS, routes learned through BGP can be redistributed using interior gateway protocols.
E. Within an AS, routes learned through an interior protocol cannot be redistributed using BGP to other autonomous systems.
Answer: B,C,D

What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network when using the “show ip bgp” command? (Choose two)
A. The network was originated via redistribution of an interior gateway protocol into BGP.
B. The network was defined by a static route.
C. The network was learned via IBGP.
D. The network was learned via EBGP.
E. The network was originated via a network or aggregate command.
Answer: A,E

What are two rules for compacting IPv6 addresses? (Choose two.)
A. Every 16-bit segment segment that consists of all zeroes can be represented with a single colon.
B. The trailing zeroes in any 16-bit segment do not have to be written.
C. The leading zeroes in any 16-bit segment do not have to be written.
D. Any single, continuous string of one or more 16-bit segments that consists of all zeroes can be represented with a double colon.
E. The maximum number of times a double colon can replace a 16-bit segment that consists of all zeroes is two.
F. Two zeroes in the middle of any 16-bit segment do not have to be written.
Answer: C,D   210-060 pdf

cisco certification 300-101 route books are available. Implementing Cisco IP Routing (ROUTE 300-101) is a qualifying exam for the Cisco CCNP Routing and Switching and CCDP certifications. The ROUTE 300-101 exam certifies the routing knowledge and skills of successful candidates.

They are certified in using advanced IP addressing and routing in implementing scalable and highly secure Cisco routers that are connected to LANs, WANs, and IPv6. Below are the details of Cisco 300-101 Route exam objectives.

10% 5.0 Infrastructure Security

5.1 Describe IOS AAA using local database
5.2 Describe device security using IOS AAA with TACACS+ and RADIUS
5.2.a AA with TACACS+ and RADIUS
5.2.b Local privilege authorization fallback
5.3 Configure and verify device access control
5.3.a Lines (VTY, AUX, console)
5.3.b Management plane protection
5.3.c Password encryption
5.4 Configure and verify router security features
5.4.a IPv4 access control lists (standard, extended, time-based)
5.4.b IPv6 traffic filter
5.4.c Unicast reverse path forwarding

20% 6.0 Infrastructure Services

6.1 Configure and verify device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T)FTP
6.2 Configure and verify SNMP
6.2.a V2
6.2.b V3
6.3 Configure and verify logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps
6.4 Configure and verify Network Time Protocol (NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication
6.5 Configure and verify IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)
6.6 Configure and verify IPv4 Network Address Translation (NAT)
6.6.a Static NAT, dynamic NAT, PAT
6.7 Describe IPv6 NAT
6.7.a NAT64
6.7.b NPTv6
6.8 Describe SLA architecture
6.9 Configure and verify IP SLA
6.9.a ICMP
6.10 Configure and verify tracking objects
6.10.a Tracking objects
6.10.b Tracking different entities (for example, interfaces, IPSLA results)
6.11 Configure and verify Cisco NetFlow
6.11.a NetFlow v5, v9
6.11.b Local retrieval
6.11.c Export (configuration only)

300-101 dumps

300-101 Exam Question 1

For security purposes, an IPv6 traffic filter was configured under various interfaces on the local router. However, shortly aft er implementing the traffic filter, OSPFv3 neighbor adjacencies were lost. What caused this issue?
A.  The traffic filter is blocking all ICMPv6 traffic.
B.  The global anycast address must be added to the traffic filter to allow OSPFv3 to work properly.
C.  The link-local addresses that were used by OSPFv3 were explicitly denied, which caused the neighbor relationships to fail.
D.  IPv6 traffic filtering can be implemented only on SVIs.
Correct Answer: C
Explanation/Reference:

OSPFv3 uses link-local IPv6 addresses for neighbor discovery and other features, so if any IPv6 traffic filters are implemented be sure to include the link local address so that it is permitted in the filter list.\

 

 

300-101 Exam Question 2
What is the purpose of the autonomous-system {autonomous-system-number} command?
A.  It sets the EIGRP autonomous system number in a VRF.
B.  It sets the BGP autonomous system number in a VRF.
C.  It sets the global EIGRP autonomous system number.
D.  It sets the global BGP autonomous system number.
Correct Answer: A
Explanation/Reference:

To configure the autonomous-system number for an Enhanced Interior Gateway Routing Protocol (EIGRP) routing process to run with
in a VPN routing and forwarding (VRF) instance, use the autonomous-system command in address-family configuration mode. To remove the autonomous-system for an EIGRP routing process from within a VPN VRF instance, use the no form of this command.

 

300-101 Exam Question 3
Which type of traffic does DHCP snooping drop?
A. discover messages
B. DHCP messages where the source MAC and client MAC do not match
C. traffic from a trusted DHCP server to client
D. traffic from a trusted DHCP server to client
D. DHCP messages where the destination MAC and client MAC do not match
Correct Answer: B
Explanation:

The switch validates DHCP packets received on the untrusted interfaces of VLANs with DHCP snooping enabled. The switch forwards  the DHCP packet unless any of the following conditions occur (in which case the packet is dropped):The switch receives a packet (such as a DHCPOFFER,DHCPACK, DHCPNAK, or DHCPLEASEQUERY packet) from a DHCP server outside the network or firewall.
The switch receives a packet on an untrusted interface,and the source MAC address and the DHCP client hardware address do not match.This check is performed only if the DHCP snooping MAC address verification option is turned on.The switch receives a DHCPRELEASE or DHCPDE CLINE message from an untrusted host with an entry in the DHCP snooping binding table, and the interface information in the binding table does not match the interface on which the message was received. The switch receives a DHCP packet that includes a relay agent IP address that is not 0.0.0.0. To support trusted edge switches that are connected to untrusted aggregation-switch ports, you can enable the DHCP option-82 on untrusted port feature, which enables untrusted aggregation- switch ports to accept DHCP packets that include option-82 information. Configure the port on the edge switch that connects to the aggregation switch as a trusted

Dumpsure is one of the leading exam preparation material providers.We have a complete range of exams offered by the top vendors of their respective industries. You can download 300-101 dumps free demos in PDF files that are the latest.

Practice cisco 300-101  route training program online here:http://www.newpass4sure.com/cisco-300-101-exam-online-sale.html

Strongly Recommended:http://www.pass4surecenter.com/cisco-200-125-vce.html

Microsoft Introduces Digital Badges for Certifications and Exams © 2017 Frontier Theme