Microsoft Introduces Digital Badges for Certifications and Exams

Pass Microsoft, CompTIA, HP, IBM, Oracle exams with Pass4itsure

Real and effective Cisco ICND2 200-105 exam dumps and 200-105 pdf online download

Where do I find a 200-105 PDF or any dump to download? Here you can easily get the latest Cisco ICND2 200-105 exam dumps and 200-105 pdf! We’ve compiled the latest Cisco 200-105 exam questions and answers to help you save most of your time. Cisco 200-105 exam “Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)” https://www.pass4itsure.com/200-105.html (Q&As:678). All exam dump! Guaranteed to pass for the first time!

Watch the Cisco ICND2 200-105 video tutorial online

Cisco ICND2 200-105 Exam pdf

[PDF] Free Cisco 200-105 pdf dumps download from Google Drive: https://drive.google.com/open?id=1Ur9hoWqgjbHgga0B07WW72cSFO_cbYbh

Cisco exam certification information

200-105 ICND2 – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/200-105-icnd2.html

Cisco ICND2 200-105 Online Exam Practice Questions

QUESTION 1
Which mode is compatible with Trunk, Access, and desirable ports?
A. Trunk Ports
B. Access Ports
C. Dynamic Auto
D. Dynamic Desirable
Correct Answer: C

 

QUESTION 2
Refer to the exhibit. Which two statements about the configuration of the switch interface are correct? (Choose two.)pass4itsure 200-105 exam question q2

A. The switchport belongs only to VLAN 2.
B. By default, all switch ports are members of VLAN 1005.
C. Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2.
D. The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2.
E. A network host can be connected to this interface.
Correct Answer: AE

 

QUESTION 3
DRAG DROP
Drag and drop the trunking terms from the left onto the correct descriptions on the right.
Select and Place:pass4itsure 200-105 exam question q3

Correct Answer:

pass4itsure 200-105 exam question q3-1

 

QUESTION 4
Which three statements about the ACEs that are matched by a Cisco APIC-EM ACL path are true? (Choose three.)
A. If the trace fails to find a matching ACE in an ACL, it is reported as implicitly permitted.
B. If an optional criterion is omitted from the trace, the results include all possible ACE matches.
C. If the trace fails to find a matching ACE in an ACL, it is reported as implicitly denied.
D. ACEs are reported only if they match.
E. All ACEs found by the trace are reported, including those that fail to match.
F. If an optional criterion is omitted from the trace, the results are reported as if the default value was specified.
Correct Answer: BCD
The following rules effect the ACL path trace results:
Only matching ACEs are reported.
If you leave out the protocol, source port, or destination port when defining a path trace, the results include ACE
matches for all possible values for these fields.
If no matching ACEs exists in the ACL, the flow is reported to be implicitly denied
Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/application-policy-infrastructure-controller-enterprise-module/1-2-x/config-guide/b_apic-em_config_guide_v_1-2-x/b_apic-em_config_guide_v_1-2x_chapter_01000.pdf page 24

 

QUESTION 5
Which IPsec security protocol should be used when confidentiality is required?
A. MD5
B. PSK
C. AH
D. ESP
Correct Answer: D

 

QUESTION 6
In which two models can control-plane functionality be implemented? (Choose two.)
A. Dispersed
B. Distributed
C. Fragmented
D. Centralized
E. Allocated
Correct Answer: BD

 

QUESTION 7
For which two reasons do you implement a PAgP EtherChannel? (Choose two.)
A. to dynamically assign VLANs to a trunk port
B. to increase bandwidth
C. to provide redundancy
D. to exchange VLAN information
E. to dynamically determine whether a port is an access port or trunk port
Correct Answer: BC

 

QUESTION 8
In which two ways can you isolate the location of a connectivity issue between two devices on your network? (Choose
two.)
A. Test whether the next hop from the source can reach the destination and work toward the destination.
B. Send an extended ping from the destination to the source.
C. Execute a traceroute from the destination and work toward the source to locate the problematic hop.
D. Send an extended ping from the source to the destination.
E. Execute a traceroute from the source to the destination to locate the problematic hop.
Correct Answer: CE

 

QUESTION 9
Which two statements identify differences between single-homed and dual-homed WAN topologies? (Choose two.)
A. Dual-homed topologies provide greater redundancy than single-homed topologies
B. Only dual-homed connections require dynamic routing to the ISP
C. Single-homed topologies are more costly to an enterprise than dual-homed topologies
D. Only dual-homed connections are connected to the same ISP
E. Single-homed topologies are more appropriate for small-business networks than dual-homed topologies
Correct Answer: AE

 

QUESTION 10
Which two statements about interior gateway routing protocols are true? (Choose two.)
A. They may use the Dijkstra algorithm.
B. They can be used to connect to another AS across the Internet as a virtual instance.
C. They may use the Bellman-Ford algorithm.
D. They cannot be used when two devices are connected through a firewall.
E. They can be used to connect to the Internet backbone.
Correct Answer: AC

 

QUESTION 11
What are the two default metrics used by EIGRP for route selection? (Choose two.)
A. Bandwidth
B. Delay
C. Reliability
D. Load
E. MTU
Correct Answer: AB
EIGRP adds together weighted values of different network link characteristics in order to calculate a metric for
evaluating path selection.
These characteristics include:
Delay (measured in 10s of microseconds)
Bandwidth (measured in kilobytes per second)
Reliability (in numbers ranging from 1 to 255; 255 being the most reliable) Load (in numbers ranging from 1 to 255; 255
being saturated) Various constants (K 1 through K 5) are able to be set by a user to produce varying routing behaviors.
However, by default, only delay and bandwidth are used in the weighted formula to produce a single 32bit metric:pass4itsure 200-105 exam question q11

Note: Default K values are: K1 = K3 = 1 and K2 = K4 = K5 = 0. When K5 is equal to 0 then [K5/( K4 + reliability)] is
defined to be 1 Use of the default constants effectively reduces the formula above to:
Reference: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/enhanced-interior-gateway-routing-protocol-eigrp/whitepaper_C11-720525.html


QUESTION 12
Which configuration item is the default username for PPP local authentication?
A. the router MAC address
B. the router hostname
C. cisco
D. The router serial number
Correct Answer: B

 

QUESTION 13
The network administrator of the Oregon router adds the following command to the router configuration: ip route
192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command? (Choose two.)pass4itsure 200-105 exam question q13

A. The command establishes a static route.
B. The command invokes a dynamic routing protocol for 192.168.12.0.
C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1.
D. Traffic for all networks is forwarded to 172.16.12.1.
E. This route is automatically propagated throughout the entire network.
F. Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network.
Correct Answer: AC

Share Pass4itsure discount codes for free

pass4itsure coupon

The benefits of Pass4itsure!

Pass4itsure offers the latest exam practice questions and answers free of charge! Update all exam questions throughout the year,
with a number of professional exam experts! To make sure it works! Maximum pass rate, best value for money! Helps you pass the exam easily on your first attempt.

about pass4itsure

Summarize:

Get the full Cisco ICND2 200-105 exam dump here: https://www.pass4itsure.com/200-105.html (Q&As:678). Follow my blog and we regularly update the latest effective exam dumps to help you improve your skills!

This maybe you’re interested

Microsoft Introduces Digital Badges for Certifications and Exams © 2018 Frontier Theme